Have you ever taken into account the number of times that you visit the mechanic for repairs and service? In most cases, you are limited due to lack of the right tools. If you can find the best floor jack, you would be able to save up on the trips that you make to the auto shop. With a good jack, you can carry out simple tasks like changing oil, replacing your filter and also changing your tires.
There are so many brands on the market and one may be lost and confused. Our main objective is to ensure that you are able to find the quality car jack for the money. We have put together a number of tips as well as floor jack reviews, with the intention of helping you make an informed decision and get the right garage jack. But first of all, lets us look at some basics about jacks.
Different Types of Jacks
When searching for the good quality jack, it is important to note that there are different types manufactured. Understanding how each type works will help you in narrowing down your decision and ensure that you have the best budget floor jack. These are divided into 3 main groups:
- Hydraulic Floor Jack:
Most manufacturers that sell jacks will have this type of garage jack, which has made it quite popular. The hydraulic jack is easy to use and is known as the best value floor jack since it has the capacity to lift enormous loads, without too much effort. It comes with a chamber that is filled up with hydraulic fluid, which facilitates the hydraulic mechanisms. When using this auto jack, you would need to pull back the plunger that transfers the hydraulic fluid from the storage tank to the chamber. This is then followed by pushing the plunger forward, which will increase the pressure and cause the lifting arm to rise. In order to keep the arm in the lifted position, the hydraulic jack comes with a ball check valve. This is the best car jack and will make it easier to lift loads, without using a lot of effort.
- Scissor Jack:
When you buy a vehicle, there is a high possibility that you will find this type of car jack included. The scissor jack is quite simple and will mainly be used for changing tires. It is designed in such a manner that it will lift your vehicle on one side to ease the process of replacing your flat tire. This is one of the cheapest options when it comes to jack for the car. However, it is important to note that it comes it with own limitations and requires a whole lot of effort.
It has a screw in the middle of the two sides and when you start rotating the screw, the two sides are pulled together, which lifts the vehicle off the ground. It is import to ensure that the scissor jack is placed well in the jacking point as it is not very stable. One of the greatest advantages is the fact that it is portable due to its compact design and light weight.
- Bottle/ Piston Jack:
This is the best rated floor jack in some spheres, especially when it comes to the lifting of very heavy loads. The bottle jack is a hydraulic jack, with the main difference being in the shape and design. It is in the form of a bottle and will stand upright when you need to use it. With this model, you can actually lift loads of up to 50 tons, easily. One of the things that you should note is that it is quite high and as such cannot be used as a low profile floor jack. You would need a whole lot of clearance space so as to make the most of the piston jack. It is also heavy, depending on the specific model that you choose, which also gives it great stability.
When you need to choose a car jack that will serve needs, you would have to consider the three types that we have highlighted above. Here are some of the models that we recommend.
Top 5 Things to Consider Before Buying a Quality Jack
The floor jack reviews above should serve a good guide to help you make an informed decision on the quality car jack. In addition to the reviews, there are other things that are required so as to make sure that you get the best auto jack for the money. There are different models of jacks and each has its own functions. We have put together a few factors that you should consider when you are looking for the best value floor jack. Here are the 5 main factors to bear in mind:
- Lifting Capacity:
While most people consider the best budget floor jack, it is important to find one that will serve your needs effectively. You need to consider the weight of the vehicle so that you can find an automobile jack that will support the weight of the vehicle. In most cases, you will find most brands having 2 ton and 3 ton lifting capacities. When you are considering the lifting capacity, it is important to note that you do not need a vehicle jack that lifts the entire vehicle, but just part of it.
Most family vehicles can be lifted by the 2 ton jack for the car and as such you would be okay with this type of car jack. For the larger vehicles, the 3 ton jacks would suffice. However, if you have very heavy vehicles, there are jacks that can even lift 5 tons of weight.
- Overall Construction:
The best car jack is the one that will last for a very long time. The longevity of your jack is determined by the construction material and this is why you need to be careful when looking at buying your garage jack. Some of the best jacks are made of steel, which seems to be strong and durable. These jacks are quite sturdy due to the heavy weight but seem to limit your mobility as they are quite heavy. If you are looking for a car floor jack that you will easily use on the go, you should consider the ones that are made of aluminum.
However, the best value car jack is the one that is made of both aluminum and steel. The combination of the two materials will give you the best service. A good jack will have an aluminum frame, making it light to carry and have a steel lift arm to enhance strength and durability. Most experts recommend the aluminum jacks as the best rated floor jack.
- Lift Height Range:
It is also advisable to consider the type of vehicle that you have so as to get the best garage jack. Mainly, you will be looking at the frame of your vehicle and the ground clearance. This will help you get the right model with an ideal lifting range. The ideal floor jack is one that can get to 18 to 20 inches as the maximum height, but there are those that will be as high as 15 inches only. It is important to consider the weight that you need to support so that it is well aligned with the height.
When you consider the lifting range, you also need to consider the minimum height so that you can identify if you need a low profile floor jack. When you have a low profile car like the sports cars or high-end cars, you will need a jack that has a very low minimum height. When you consider the height that the automobile jack can rise, it is essential to ensure that it has a base that supports the weight at that height.
- Lifting Speed:
The objective of having a lightweight tool is to make work easier and as such, you need to consider the lifting speed of the jack for the car. You need to pick a model that takes the shortest time possible and requires the least amount of effort. The main thing to look out for is the type of pump that it has and pistons included. The best value floor jack would have a dual piston pump that makes it easier to use the hydraulic jacks.
Most types will get to the maximum height with 8 to 12 pumps, on average. However, if you want to find the best floor jack, you need to consider one that has a quick lift technology, which will allow you to get to the maximum height with less than 5 pumps.
It is important to consider the purpose that you intend to use the jack for. This is the main determinant of the type of vehicle jack that you would buy. If you want a floor jack that you will be able to use to lift a motorcycle, then you may not need a jack that has a very high lifting capacity. However, you will need to ensure that you have all the necessary accessories that will support your tasks and enhance your safety.
One of the best ways to ensure that you have the best car jack, you may want to look at professional floor jack reviews. These will give you a sneak peek of what to expect from the jack that you are considering to buy.
- Price and Warranty:
The essence of getting the auto vehicle jack for the money is to ensure that you find a great car jack, without spending a fortune. Most of them cost between $100 to $300 and it is important to be wary of the overly cheap models. You should never compromise on the quality of the garage jack just to save on a few dollars. When you have a low quality car jack, it may cause serious injuries and fatalities.
While looking for the best budget floor jack, you should also consider the warranty on the model that you consider buying. Models that have a long period of warranty are considered to be of high quality. This is an indicator of the quality of jack that you are buying. It is also imperative to consider what the warranty covers.
For more in-depth information about How to Choose the high quality jack, I highly recommend this article: https://automotivetoolspoint.com/choose-the-best-floor-jack/
Best 5 floor jack reviews Comparison Chart
- Price: $$
- Capacity: 3 Ton
- Body: Steel
- Item Weight: 79 pounds
- Warranty : Check Product Page
- Price: $$$
- Capacity: 3.5 Ton
- Body: Not Mention
- Item Weight: 85 pounds
- Warranty : Check Product Page
- Price: $$$
- Capacity: 3 Ton
- Body: Aluminum
- Item Weight: 56 pounds
- Warranty : Check Product Page
- Price: $$$
- Capacity: 3 Ton
- Body: Aluminum and Steel
- Item Weight: 59.15 pounds
- Warranty : Check Product Page
- Price: $$$
- Capacity: 3 Ton
- Body: Aluminum
- Item Weight: 0.48 ounces
- Warranty : Check Product Page
Our Top Pick 5 Best Floor Jack Ultimate Reviews
The search for the high-performance jack can be quite tedious if you are not sure of what you are looking for. In addition to that, there are so many different models and each claims to be the best. We have done expert floor jack reviews, which will help you make an informed decision. Here are our top 5 picks:
Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift
Any Pittsburgh floor jack will serve your needs in the best way possible. The main reason why you should consider the Pittsburgh Automotive 3 ton heavy duty model is the fact that it has a solid construction. It is made of high quality steel and has an industrial grade finish. With a minimum height of 2 7/8 inches, this is the ideal low profile car jack. It rises to a maximum height of 19 ¾ inches and as such, it will grant you adequate space to be able to carry out any tasks on the underside of the vehicle.
As you may have noted from the name, the Pittsburgh automotive floor jack comes with a rapid pump. This is what allows you to get to the maximum height with only 3 ½ pumps. As such, you will not need a lot of effort to be able to lift your load. It also comes with a handle that has a total length of 45 ¼ inches and this means that you will conveniently operate the jack, without overly bending. This is not a lightweight tool as it weighs 71.7 pounds, which enhances the stability of the jack when in use.
When you are lifting your load, you will enjoy great control when using this Pittsburgh 3 ton floor jack. This is made possible by the universal joint release mechanism that gives you absolute control of your load irrespective of the angle of the handle. There are steel casters that have been included on this tool and this will help in the moving and positioning of the automotive jack. In addition, the steel casters will also provide great stability when your vehicle is hoisted off the ground.
Pittsburgh Automotive 3 ton floor jack Features:
- The Pittsburgh automotive floor jack comes with a rapid pump that is supported by dual piston pumps, making it possible to lift loads to the maximum height in 3.5 strokes.
- This is one of the strongest and most durable brands on the market, which is made possible the solid construction and can lift loads of up to 3 tons.
- This Pittsburgh floor jack weighs 71.7 pounds and this is quite heavy. It serves as an advantage as it will provide great stability.
- The lifting range of this tool is 2 7/8 inches to 19 ¾ inches, and this makes it an ideal option for low profile vehicles.
- When using this Pittsburgh 3 ton floor jack, you should not be worried about the vehicle being dented as the handle and the saddle are covered with great padding.
Performance Tool W1627 3.5 Ton Low Profile Service Jack
A good jack is one that has the capacity to serve your needs in the best way possible. If you are usually engaged in heavy lifting, then the Performance Tool would be the right option for you. This is an automotive jack that has the capacity to lift loads of up to 3.5 tons. As if this is not enough, this a great low profile floor jack since it has a minimum lifting height of 4 inches. The maximum height is 20 ½ inches, which makes it an ideal model for different types of vehicles with varied heights. You can rest assured that the tool will give you adequate room to work underneath your vehicle.
The saddle of this low profile hydraulic jack has dual positions, which extends the usability of this model. As far as the safety goes, there is a thick rubber padding on the saddle and this will prevent the car jack from slipping while in use. In addition, this will protect the vehicle from any damages. The extended side flanges on this 3 ton aluminum floor jack will enhance the strength and longevity of this car jack.
While it has the capacity to lift loads of up to 3.5 tons, there are safety measures that have been put in place. It comes with safety valves that will prevent any cases of overloading or over pumping of this low profile 3.5 ton floor jack. It is made of high quality material and has a unique design that is appealing to most users. The swivel casters will make it easier for you to move the jack around and also enhance the stability while it is in use.
3.5 ton low profile floor jack Features
- With this low profile hydraulic jack, you will be able to lift loads of up to 3.5 tons, which is quite incredible.
- The fast rising technology on this 3 ton aluminum floor jack is made possible by the dual pump that speeds up the lifting process.
- The handle and the saddle are well padded and this will protect the frame of the vehicle from any damages and be denting.
- The swivel casters have been included on this low profile 3 ton floor jack and as such, you will be able to move it with ease and get additional support.
- The low profile floor jack has a bypass device and safety valves that will ensure that the car jack is not overloaded.
Arcan ALJ3T Aluminum Floor Jack – 3 Ton Capacity
If there is a model of jacks that is highly rated, then it much is the Arcan ALJ3T due to its versatile features. With this tool, you will be able to lift vehicles that weigh up to 3 tons and the fact that the minimum height is 3 ¾ inches means that you can use it as a low profile jack. The lifting range goes all the way up to 19.4 inches, which makes it an ideal model for different vehicles, with varied height. The Arcan 3 ton aluminum floor jack is one of its kind and quite comprehensive.
When it comes to lifting loads, you will be amazed by the speed at which the saddle will rise. This is made possible by the dual piston pump. It will take you 12 pumps to be able to get to the maximum height with this Arcan floor jack. With a weight of 56 pounds, it is quite light and as such, you can carry it around without a problem. It is made of aluminum, which is a light metal, yet strong enough to withstand the heavy weight of your vehicle. There are lightening holes that have been included to ensure that you get the sturdiness that you would need.
You should never worry about the issues of overloading it since it has a safety valve to protect it. The saddle is heavily padded and this will give you a good grip when supporting the load. This will prevent any cases of slippage and also protects the components of your vehicle from any dents or damage. It comes with a two piece handle, which is quite convenient. It will be easier to store and gives you adequate length to prevent any bending when you are using the garage jack. This makes it pass as the best 3 ton floor jack on the market.
Arcan ALJ3T 3 Ton aluminum Jack Features
- While the Arcan ALJ3T weighs only 56 pounds, it has the capacity to lift loads of up to 3 tons.
- This the best 3 ton floor jack as it is made of high quality aluminum, which makes it strong and durable and also comes with lightening holes.
- The quick lift mechanism is made possible by the dual piston pump and as such, you will be able to get the saddle to the maximum height with only 12 pumps.
- The lifting range of the Arcan car jack is 3 ¾ inches to a maximum height of 19.4 inches.
- The safety valve that is included on the Arcan 3 ton aluminum floor jack will protect it from any cases of over pumping and overloading.
Powerzone 380044 3 Ton Aluminum and Steel Garage Jack
The Powerzone 380044 3 ton aluminum and steel garage jack is made in China but has surpassed the expectations of most users. While most people may consider products from China to be of low quality, this one is quite different. It is made of steel and aluminum, which is responsible for the sturdiness and the longevity of this floor jack. The steel parts enhance the strength of the jack, while the aluminum frame makes this light and the best car jack in its category.
With this car jack, you will be able to support loads of up to 3 tons. It is also considered to be an effective 3 ton low profile floor jack since the minimum height is 4 inches. As such, you will be able to slip it under low profile vehicles without a problem. The maximum height achievable is 18 ¼ inches. There is a quick lifting mechanism that makes it easier to lift loads within a short time. While you may get excited when using the jack, the safety valves will ensure that you do not overload it.
Another unique feature of Powerzone 380044 jack is the padded saddle that has a foam bumper. This is primarily meant to protect the vehicle from any form of damage when you are using it. However, it also gives you an excellent grip when it gets into contact with the load. When you need to maneuver with this tool, it is much easier since it comes with rear wheels that swivel and fixed wheels at the front. In addition to facilitating movement, the wheels are made of steel and this will enhance the stability of the Powerzone floor jack.
Powerzone 3 ton garage jack Features:
- The Powerzone garage jack has the capacity to lift loads of up to 3 tons and as such, you will be able to work with different types of the vehicle without a problem.
- The lift arm of the 3 ton low profile floor jack is made of heavy duty steel, which is quite strong and durable.
- With an aluminum frame, you will be able to move around without a problem, since the aluminum makes it quite light.
- This is the best car floor jack in that it has a lifting range of 4 inches all the way up to 18 ¼ inches.
- There is a quick lift feature on the Powerzone 380044 3 ton aluminum and steel garage jack and this will cause you to get to the maximum height with only 6 strokes of the pump.
NOS NSJ0301 3-Ton Aluminum Service Jack
The NOS 3 ton floor jack is one of the kind since it is made of by the manufacturers of Arcan jacks. NOS is an abbreviation for Nitrous Oxide Systems and as such, this is a powerful tool. It is quite stable and has amazing quality as it can support loads of up to 3 tons. This auto jack is quite light as it weighs 58 pounds and as such, you can be able to move around with it, easily. This is the best aluminum car jack since it is quite stable and durable. You will be able to use it for a very long time without any problems.
The low profile aluminum jack has taken safety into great considerations. There is a safety valve that has been included and as such, there will be adequate protection to prevent any cases of overloading or over pumping the car jack. When it comes to the lifting mechanism, there is a rapid pump that has dual pistons and as such, you will be able to lift your loads with very few pumps.
This lightweight model has a minimum height of 3 ¾ inches and will rise to the maximum 18.125 inches. This will give you enough room to be able to operate underneath the vehicle. The universal joint release mechanism gives you great control to ensure that achieve precision with your load.
There is a two piece handle that makes this to rank as the best aluminum floor jack. This will make it easier to store the tool as you can dismantle it. When you assemble the jack handle, you will be able to enjoy great length that prevents any bending. The saddle comes with great padding and therefore you can rest assured that you will have great grip and in addition, the frame of your vehicle will be well protected.
NOS 3 ton floor jack Features
- The lifting range of the NOS 3 ton floor jack is 3 ¾ inches to 18.125 inches and as such it can be used on different types of vehicles.
- The lifting capacity of this lightweight model is 3 tons, which is the same as 6,000 pounds.
- The rubber padding on the saddle and the foam handle bumper are designed in such a manner that they will protect the frame and components of the vehicle.
- This low profile aluminum car jack is made of aluminum and this is why it weighs 58 pounds. It is pretty light but strong and durable.
- There is a safety valve which makes it the best aluminum floor jack. This is meant to prevent any cases of overloading and over pumping.
How to Use a Floor Jack Safely?
The floor jack is a mechanical tool and needs to be used in the right manner. One of the things that you can never compromise on is your safety. It is advisable to ensure that you are fully aware of how to use the best car jack in a safe manner. Here is an easy guide to follow and make the most of your jack:
- Have the Car Parked on a Solid and Flat Surface: Before using your best value floor jack to lift your car, you should have your car parked on a flat surface. This is to ensure that the vehicle does not start rolling over when you attempt to lift it up. In addition to this, the surface needs to be quite solid such that the automotive jack will not start sinking it into the ground when the weight of the car rests on the garage jack.
- Engage Parking Brake: As an additional safety measure when using the car jack, you should also engage the parking brake so as to make sure that the vehicle is completely immobile. You would not want the vehicle to start moving when it is one the floor jack.
- Use Wheel Chocks: Additionally, you should place wheel chocks in the opposite direction of the wheels that are being jacked up. This will enhance the rigidity of the vehicle and ensure that it stays in place when you staring jacking it up with the jack for the car.
- Look out for Jacking Points: Every vehicle has specific points that are specially designed to be used as the contact point of the floor jack. If you cannot identify the jacking points, you should check the vehicle’s manual.
- Lift and Lower the Jack in Slow Motions: As indicated earlier, the best budget floor jack is a mechanical device that may be become faulty at any time. As such, it is advisable to use slow motions to lower and raise the jack, while inspecting it. In the event that you notice any fault with the tool, you should stop using it right away.
- Make Use of Jack Stands: You should never attempt to go underneath a vehicle without supporting the vehicle with jack stands. As such, when you are looking for the jack stands to work with the best rated floor jack, you should find one that can support the weight of your car.
Check Here An infographic is shown how to use a floor jack properly and safely
Floor Jack Supporting Accessories
It is not enough to have the best floor jack, as you will still need some accessories to support the tool. When you have the right accessories, it will be easier to enhance the functionality of the car jack. Here are some of the accessories to support your auto jack:
- Car Ramps:
Car ramps are a great alternative to the garage jack. This will allow you to get your vehicle off the ground in the as very short period of time. When you have car ramps, you will not need to use jack stands to support the vehicle. However, there are tasks that you cannot complete with car ramps like bleeding brakes and rotating tires.
- Wheel Chock
These are in the form of wedges and are placed behind wheels to prevent the vehicle from rolling when you lift it with your floor jack. Place the wheel chocks on the opposite side of the part that you intend to lift. Irrespective of how good your handbrake is, you should always use the wheel chocks as supporting accessories for the floor jack.
- Transmission Jack:
One of the most challenging tasks for any car owner is removing or installing the transmission. As such this cannot be accomplished using the ordinary jack for jack. What you need is a transmission jack, but if you do not have one, you find an adaptor that will convert your floor jack into a transmission jack. If you are sure on how the process of installing transmission is carried out, it is advisable to allow the professional mechanic to do you for you.
- Jacks Stand:
Jack stands are also known to be safety accessories. When you have used your best rated floor jack to lift the vehicle to the desired height, you should place jack stands. This should be done before going underneath the vehicle. When buying jack stands, you need to ensure that you find a pair that is similar and one that has the capacity to support the weight of your vehicle. Be sure that the vehicle is settled on the jack stands firmly before sliding under the vehicle.
- Mechanics Creeper:
Finally, the other accessory that comes in handy when using a lightweight floor jack is the mechanic’s creeper. This will allow you to slide under the vehicle with so much ease. When working on some tasks like changing the oil, the creeper is quite useful. This will prevent cases of having to lie on the floor or cardboards. The fact that mechanics creepers come with wheels, you will easily move around from one point to another.
As you can see, the process of getting the best floor jack is quite involving. However, we have simplified the whole process by providing expert reviews. In addition, we have stated some essential factors that should serve as a guide and help you make an informed decision. From the models listed above, we recommend the Arcan ALJ3T Aluminum Floor Jack – 3 Ton Capacity due to its amazing capabilities. If this guide was informative and useful, please feel free to share it around with tour friends and loved ones.